PKB Learning Management System

Maklumat berkaitan rangkaian komputer di Institusi.

is a study on history of highway construction and organization involved in Malaysia. This course also provides the students with the knowledge regarding the method and design involved in traffic engineering. This course emphasizes on introduction to highway and traffic, transportation planning, pavement materials, construction of flexible pavement, construction of rigid pavement, traffic control equipment and road furniture, flexible pavement design, junction design, traffic management and highway maintenance.

Industri pembinaan ketika ini memainkan peranan besar dalam perkembangan ekonomi negara.Justeru itu,bidang-bidang yang berkaitan dengan kerja-kerja binaan seperti kerja2 ikatan bata dan kerja analisa dan amali konkrit perlu dititik beratkan supaya hadil kerja binaan bagi satu satu projek dapat dihasilkan dengan kualiti dan mutu yang tinggi.

Oleh itu, mohon para pelajar mempelajarinya dari awal hingga akhir proses pembelajaran ini dari masa ke semasa.

Engineering Drawing & Computer Aided Drafting (CAD) covers the basic manual drafting of technical drawing to enhance engineering student ability to communicate ideas in modern technology industry. it provide a platform for student to interpret engineering drawing, use CAD and develop their skills in technical sketching

DESIGN BEAM, COLUMN, TRUSS AND CONNECTION ACCORDING TO EUROCODE 3

THEORY OF STRUCTURE COVERS BASIC KNOWLEDGE OF FACTS AND PRINCIPLES OF STRUCTURE

A study About Fluids Behaviour Related To Civil Engineering

BUILDING SERVICES focuses on the basic concepts and the principles of the systems in a building. The course emphasizes on the electrical installation system, fire prevention system, building transportation system, air conditioning system, and maintenance works

ENGINEERING DRAWING & COMPUTER AIDED DRAFTING (CAD) covers the basic manual drafting of technical drawing to enhance engineering student ability to communicate ideas in modern technology industry. It provides a platform for student to interpret engineering drawings, use CAD and develop their skills in technical sketching. Student should be able to produce engineering drawing using manual graphics sketching and CAD software related to IR4.0

Building services are the systems installed in buildings to make them comfortable, functional, efficient and safe. Building services might include: Building control systems. Energy distribution. Energy supply (gas, electricity and renewable sources such as solar, wind, geothermal and biomass)

Principle of Economics course exposes students to the knowledge and basic principles of economics. The course emphasizes on fundamentals of microeconomics, elasticity of demand and supply, theory of consumer behavior, theory of production, market structure, fundamental of macroeconomics, money and banking system, role of government and macroeconomics problems.

BUILDING SERVICES 1 course provides knowledge to the students on the concept and basic principle in building services. The course focuses on ventilation, air conditioning system, cold and hot water supply systems, gas supply system, telecommunication system and drainage system. This course also exposes students to the knowledge on firefighting system and refuses disposal system for multi-storey building.

Construction technology 1

DATA ANALYSIS  cover the fundamental data analysis concepts. The course shall expose students on the basic concept of data analysis that covers data collection methods, presentation of data, numerical description measures, correlation and regression and application of statistical software. 

Building works Measurement 5 course provide students knowledge on the quantity measurement for steelworks , external works, demolition and renovation works. This content comprises of steel works and external works such as fencing and gate, landscaping, drainage, sewerage and water reticulation system. It also covers demolition and renovation works.

CONSTRUCTION MANAGEMENT course exposes students to the construction project management techniques practiced in this country.  The course emphasis is on the planning of construction future control and construction site management.  This course also gives students knowledge in the implementation of leadership and management tasks.

CONSTRUCTION TECHNOLOGY 3
course exposes students to the technology involved in the construction. The course emphasizes on long span roof, basement and external works. This course also gives students knowledge on demolition & renovation works and site & soil investigation.

BUILDING SERVICES 2 course gives students knowledge on the basic concepts and
principles of building services. The course emphasizes on the understanding and
knowledge development of sanitation system, sewerage system and treatment
process, electrical supply system, mechanical conveyors and building management system.

BUILDING DRAWING & CADD covers basic construction drawings principles in drafting fundamentals ,orthographic projection, isometric and the section view.

ELECTRICAL WIRING course exposes students to the various aspects of wiring installation according to the MS IEC 60364 standard.

OCCUPATIONAL SAFETY AND HEALTH FOR ENGINEERING course is designed to impart understanding of the self-regulatory concepts and provisions under the Occupational Safety & Health Act (OSHA).  

Designed to provide students with the knowledge of AC electrical circuits. 

ELECTRONIC CIRCUITS emphasizes the concept of electronic device applications. The course covers the fundamental of electronic circuit application which include power supply unit, oscillator, operational amplifier, timer, filters and AD/DA converters. The content cover circuit configurations, operation and application of the electronic circuits

COMPUTER AIDED ELECTRICAL DRAWING provides knowledge and exposure on the usage of AutoCAD software. The course focuses on the application of the software to produce drawings of graphics, electrical / electronic component symbols, circuit schematics and electrical wiring layout diagram. The skills acquired from this course will also equip students with the ability to learn and use other similar software

COMPUTER NETWORK FUNDAMENTALS introduce students to the concepts and principles of data transmission and computer networks. This course enables students to correctly use standard terminology in describing the main Local Area Network (LAN) topologies, hardware and software components used in networking. This course provides students with the knowledge and skills to build a network infrastructure using copper cabling, and wireless devices wisely. Students also learn to troubleshoot and secure the network

INTERACTIVE MULTIMEDIA APPLICATIONS exposes students to the process of creating interactive multimedia presentations.

POWER ELECTRONICS couse is aimed to equip students with the knowledge and skills related to power electronics devices and its application in power conversion

PROGRAMMABLE LOGIC CONTROLLER (PLC) AND AUTOMATION provides knowledge regarding the concept and principle of automation system as well as PLC. This course emphasizes the relationship between relay ladder logic/hardwired and PLC, application of industrial sensors and actuators through the PLC, design process, programming and maintenance method. This course also provides knowledge and skills in designing of automation system based on the applications of PLC.

CIRCUIT ANALYSIS analyze an AC circuits  using various circuit analysis techniques and theorems and application of Laplace Transform and Fourier Series.

MOTOR CONTROL & DRIVES course provide student with the knowledge of the principle operations and applications of motor control and electrical drives. This course covers the methods of speed control and braking methods for AC and DC motors.

EMBEDDED ROBOTIC presents the combination of mobile robots and embedded systems, from introductory to intermediate level. It is structured in three parts, which are embedded systems, mobile robot, and mobile robot applications.

ENTREPRENEURSHIP focuses on the fundamentals and concept of entrepreneurship in order to inculcate the value and interest in students to choose entrepreneurship as a career.

POWER SYSTEM course will provide students with the concepts of non-renewable and renewable energy. It also annotate on the environmentally friendly electrical power generation, transmission, distribution and consumerization of the electrical power.

MEASUREMENT DEVICES introduces students to the basic concept of electrical instrument and measurement.

ELECTRICAL TECHNOLOGY course will introduce students to the principles related to DC electrical circuits. It covers the fundamental laws, theorems and circuit techniques of the electrical technology basic fundamental. This course also covers inductor, capacitor, magnetic and electromagnetic circuits.

ELECTRICAL WIRING exposes students to the aspects of wiring installations.  This course provides students with the knowledge and skills to do different types of wiring, wiring inspection and testing for the circuits.

OCCUPATIONAL SAFETY AND HEALTH course is designed to impart understanding of the self-regulatory concepts and provisions under the Occupational Safety & Health Act (OSHA). This course presents the responsibilities of employers and employees in implementing and complying with the safety procedures at work. This course provide an understanding of the key issues in OSH management, incident prevention, Emergency Preparedness and Response (EPR), fire safety, occupational first aid, Hazard Identification, Risk Assessment and Risk Control (HIRARC) and guide the students gradually into this multi-disciplinary science

PROGRAMMING FUNDAMENTALS course providesthe skills necessary for the effective of application of computation and computer programming in engineering applications. Students will develop their programming skillsthrough a variety of assignments and labs and by reviewing case studies and example programs. The learning outcome is proficiency in writing small to medium programsin a procedural programming language

SEMICONDUCTOR DEVICES introduces students to the basic electronic theories and devices. It covers the fundamentals of electronic devices which includes diodes, bipolar junction transistor and field effect transistors. The content encompasses devices structure to biasing basic applications.

DIGITAL ELECTRONICS introduces the theories on the basic of digital systems. This course emphasizes on the digital system fundamentals and applications.  This course mainly covers number systems, code system, logic gates, Boolean operations, flip-flops, counters and registers.

ELECTRONIC CIRCUITS emphasizes the concept of electronic devices applications. The course covers the fundamental of electronic circuit applications which include

power supply unit, oscillator, operational amplifier, timer, filters and AD/DA converters. The contents cover circuit configurations, operations and applications of 

COMPUTER AIDED ELECTRICAL DRAWING provided knowledge and exposure on the usage of AutoCAD software.  The course focuses on the application of the software to produce drawings of graphics, electrical/ electronic component symbols, circuit schematics and electrical wiring layout diagram. The skills acquired from this course will also equip students with the ability to learn and use other similar software.

ELECTRONIC COMPUTER AIDED DESIGN covers the basic concept and fundamentals of electronic circuit simulation. It also covers the applications of electronic packages for electronic circuit simulation at the circuit level and the logic level.

EMBEDDED SYSTEM APPLICATIONS covers the basic concept and application of microcontroller system based on Peripheral Interface Controller (PIC) microcontroller. Students will learn software and hardware development on PIC16F/PIC18F microcontroller development system and understand how to do interfacing with external devices using suitable internal chip features. Students are exposed to the new Microcontroller Unit (MCU) simulation software such as Proteus.

INTERACTIVE MULTIMEDIA APPLICATIONS exposes students to the process of creating interactive multimedia presentations including the role of and design of multimedia systems which incorporate digital audio, graphics and video, underlying concepts and representations of sound, pictures and video, data compression and transmission, integration of media, multimedia authoring, and delivery of multimedia. Students will produce a final digital interactive multimedia projects.

PROGRAMMABLE LOGIC CONTROLLER (PLC) AND AUTOMATION provides knowledge regarding the concept and principle of automation system. This course emphasizes the relationship between conventional/hardwired/relay ladder logic (RLL) and PLC system, application of various industrial input and output devices of PLC, designing process, programming, constructing and PLC maintenance method. This course also provides knowledge and skills in designing environmentally friendly of automation control system based on conventional/hardwired/relay ladder logic (RLL) and PLC.

POWER ELECTRONICS course is aimed to equip students with the knowledge and skills related to power electronic devices and its application in power conversion. This course also will focus on the operational principle of rectifiers, choppers, inverters and AC voltage controller circuits. Emphasis is given more on producing the output voltage waveforms of the converters

CIRCUIT ANALYSIS provides knowledge and exposure on how to analyze electrical circuits that have alternating current (AC) voltage or current sources using various circuit analysis techniques and theorems. Application of mathematic theorem of Laplace Transform is also introduced as another method of AC circuit analysis and the use of mathematic theorem of Fourier Series to analyze electrical waveforms.

EMBEDDED ROBOTIC presents the combination of mobile robots and embedded systems,from introductory to intermediate level.It is structured in three parts,which are embedded systems,mobile robot and mobile robot applications. These parts are essential to students in mastering the crucial steps of building a complete working robotic system. They will help them to develop robots that not only can move,but intelligent as well.

CMOS INTEGRATED CIRCUIT DESIGN AND FABRICATION course exposes the students to the basic integrated circuit (IC) and CMOS IC fabrication processes which include oxidation, doping, photolithography, metallization and etching. This course also covers IC testing, reliability and failure analysis. The students will be equipped with the knowledge of inverter design and simple to complex CMOS logic gates. The students will experience developing the physical layout of integrated circuit based on specific transistor feature size and using CAD tools while adhering to specific design rules. Finally, this course also covers the topic on design methodology used in designing integrated circuits.

This course focuses on the common protection system applied to power system network, switching equipment and their operation. This course also introduces the methods of selecting suitable protection equipment based on fault current and apparent power calculations.

ELECTRICAL MAINTENANCE AND REPAIR provides students with the knowledge and exposure to the method used in maintenance and repair of electrical equipment. It emphasizes on maintaining electric powered equipment. It also
demonstrates knowledge and understanding of electrical schematic diagram and adheres to all safety procedures, regulations for maintaining and display good practices by considering sustainable energy practices.

MOTOR CONTROL & DRIVES course provide students with the knowledge of the principle operations and applications of motor control and electrical drives. This course covers and methods of speed control and breaking methods for ac and dc motors. Emphasis is given on principle operation, characteristic curve and solving the related problems.

ENTREPRENEURSHIP focuses on the fundamentals and concept of entrepreneurship in order to inculcate the value and interest in students to choose entrepreneurship as a career. This course can help students to initiate creative and innovative entrepreneurial ideas. It also emphasizes a preparation of a business plan framework through business model canvas.

ELECTRICAL TECHNOLOGY course will introduce students to the principles related to DC electrical circuits. It covers the fundamental laws, theorems and circuit techniques of the electrical technology basic fundamental. This course also covers inductor, capacitor, magnetic and electromagnetic circuits.

ELECTRICAL WIRING course exposes students to the various aspects of wiring installation according to the MS IEC 60364 standard. Students will be able to relate theoretical aspect in practical work on electrical wiring during workshop sessions. This course also provides students with the knowledge and skill in doing different types of wiring installation, wiring protection, wiring inspection, wiring testing and sustainable energy practices in electrical wiring.

POWER SYSTEM course will provide students with the concepts of non-renewable and renewable energy. It also annotate on the environmentally friendly electrical power generation, transmission, distribution and consumerization of the electrical power.

POWER ELECTRONICS course is aimed to equip students with the knowledge and skills related to power electronic devices and its application in power conversion. This course also will focus on the operational principle of rectifiers, choppers, inverters and AC voltage controller circuits. Emphasis is given more on producing the output voltage waveforms of the converters

MOTOR CONTROL & DRIVES course provide students with the knowledge of the principle operations and applications of motor control and electrical drives. This course covers and methods of speed control and breaking methods for ac and dc motors. Emphasis is given on principle operation, characteristic curve and solving the related problems.

This course focuses on the common protection system applied to power system network, switching equipment and their operation. This course also introduces the methods of selecting suitable protection equipment based on fault current and apparent power calculations.

ELECTRICAL MAINTENANCE AND REPAIR provides students with the knowledge and exposure to the method used in maintenance and repair of electrical equipment. It emphasizes on maintaining electric powered equipment. It also
demonstrates knowledge and understanding of electrical schematic diagram and adheres to all safety procedures, regulations for maintaining and display good practices by considering sustainable energy practices.

PROGRAMMABLE LOGIC CONTROLLER (PLC) AND AUTOMATION provides knowledge regarding the concept and principle of automation system. This course emphasizes the relationship between conventional/hardwired/relay ladder logic (RLL) and PLC system, application of various industrial input and output devices of PLC, designing process, programming, constructing and PLC maintenance method. This course also provides knowledge and skills in designing environmentally friendly of automation control system based on conventional/hardwired/relay ladder logic (RLL) and PLC.

TELECOMMUNICATION NETWORK provides students with the basic knowledge of telecommunication network of Next Generation Networks (NGN). This course focuses on NGN architectures, protocols and services, including technologies and regulation. 

SEMICONDUCTOR DEVICES introduces students to the basic electronic theories and devices. It covers the fundamentals of electronic devices which includes diodes, bipolar junction transistors and field effect transistors. The content encompasses devices structure to biasing basic applications

ELECTRICAL CIRCUITS is designed to provide students with the knowledge related to AC of electrical circuits.

FIBER OPTIC COMMUNICATION SYSTEM introduces students to the basic concept of fiber optic in communication systems with environmental sustainability.
This course covers fiber optic characteristics, components in fiber optic system, losses in fiber optic cable and the fundamental concept of optical measurement. This course also provides knowledge in splicing techniques with safety awareness, multiplexing techniques and design consideration in fiber optic communication link.

INTERACTIVE MULTIMEDIA APPLICATION exposes students to the process of creating interactive multimedia presentation including the role and design of multimedia systems which incorporate digital audio, graphics and video, underlying concepts and representations of sound, pictures and video, data compression and transmission, integration of media, multimedia authoring, and delivery of multimedia. Students will produce a final digital interactive multimedia.

data communication and networking

MICROWAVE DEVICES introduces the existence, characteristic and the effect of electromagnetic wave to the surrounding. This course also focuses on the devices used in microwave communication system such as waveguide (transmission lines), basic accessories, sources, microwave antennas as well as the techniques of measurement used in microwave system.

WIRELESS COMMUNICATION introduces student to the basic of wireless communication includes several specialized topics. Students are expose to wireless networking, evolution of mobile communication, cellular network channels, techniques used to enhance capacity and speed, interferences, radio wave propagation and multiple access techniques. This course also exposes the student to the awareness of wireless technology to the health and environmental.

ELECTRICAL TECHNOLOGY course will introduce students to the principles related to DC electrical circuits. It covers the fundamental laws, theorems and circuit techniques of the electrical technology basic fundamental. This course also covers inductor, capacitor, magnetic and electromagnetic circuits.

ELECTRICAL WIRING course exposes students to the various aspects of wiring installation according to the MS IEC 60364 standard. Students will be able to relate theoretical aspect in practical work on electrical wiring during workshop sessions. This course also provides students with the knowledge and skill in doing different types of wiring installation, wiring protection, wiring inspection, wiring testing and sustainable energy practices in electrical wiring.

OCCUPATIONAL SAFETY AND HEALTH course is designed to impart understanding of the self-regulatory concepts and provisions under the Occupational Safety & Health Act (OSHA). This course presents the responsibilities of employers and employees in implementing and complying with the safety procedures at work. This course provide an understanding of the key issues in OSH management, incident prevention, Emergency Preparedness and Response (EPR), fire safety, occupational first aid, Hazard Identification, Risk Assessment and Risk Control (HIRARC) and guide the students gradually into this multi-disciplinary science

ELECTRONIC CIRCUITS emphasizes the concept of electronic devices applications. The course covers the fundamental of electronic circuit applications which include power supply unit, oscillator, operational amplifier, timer, filters and AD/DA converters. The contents cover circuit configurations, operations and applications of the electronic circuits.

COMPUTER AIDED ELECTRICAL DRAWING provided knowledge and exposure on the usage of AutoCAD software.  The course focuses on the application of the software to produce drawings of graphics, electrical/ electronic component symbols, circuit schematics and electrical wiring layout diagram. The skills acquired from this course will also equip students with the ability to learn and use other similar software.

ELECTRONIC COMPUTER AIDED DESIGN covers the basic concept and fundamentals of electronic circuit simulation. It also covers the applications of electronic packages for electronic circuit simulation at the circuit level and the logic level.

COMMUNICATION SYSTEM FUNDAMENTALS introduces the students to the concepts of communication system. This course covers the principles of communications, analog and digital modulation techniques, multiplexing and transmission medium. It also exposes the students to the basic of data communication system

TELECOMMUNICATION NETWORK provides students with the basic knowledge of telecommunication network of Next Generation Networks (NGN). This course focuses on NGN architectures, protocols and services, including technologies and regulation. 

ENTREPRENEURSHIP focuses on the fundamentals and concept of entrepreneurship in order to inculcate the value and interest in students to choose entrepreneurship as a career. This course can help students to initiate creative and innovative entrepreneurial ideas. It also emphasizes a preparation of a business plan framework through business model canvas.

EMBEDDED SYSTEM APPLICATIONS covers the basic concept and application of microcontroller system based on Peripheral Interface Controller (PIC) microcontroller. Students will learn software and hardware development on PIC16F/PIC18F microcontroller development system and understand how to do interfacing with external devices using suitable internal chip features. Students are exposed to the new Microcontroller Unit (MCU) simulation software such as Proteus

SIGNAL & SYSTEM provides knowledge on the signals and systems, the Linear Time-Invariant (LTI) systems, the Laplace transform, the z-transform and Fourier analysis. 

CIRCUIT ANALYSIS provides knowledge and exposure on how to analyze electrical circuits that have alternating current (AC) voltage or current sources using various circuit analysis techniques and theorems. Application of mathematic theorem of Laplace Transform is also introduced as another method of AC circuit analysis and the use of mathematic theorem of Fourier Series to analyze electrical waveforms

DATA COMMUNICATION AND NETWORKING exposes the student to the principle of data communication and networking. This course cover basic concept of data communication and networking fundamental for a quality data transmission. Students are exposed to Open System Interconnection (OSI) Model and Network Protocol. Students are also introduced to Local Area Network and public digital network.

MICROWAVE DEVICES introduces the existence, characteristic and the effect of electromagnetic wave to the surrounding. This course also focuses on the devices used in microwave communication system such as waveguide (transmission lines), basic accessories, sources, microwave antennas as well as the techniques of measurement used in microwave system.

Wireless Communication introduces student to the basic of wireless communication includes several specialized topics. Students are expose to wireless networking, evolution of mobile communication, cellular network channels, techniques used to enchance capacity and speed, interferences, radio wave propagation and multiple access techniques.

SATELLITE AND RADAR COMMUNICATION SYSTEM introduces to students the concept of satellite and radar, satellite orbits, space satellite subsystem, satellite communication system, radar fundamentals and different types of radar system. It also covers end to end satellite and radar communication system in various generations and latest technologies.

OCCUPATIONAL SAFETY AND HEALTH course is designed to impart understanding of the self-regulatory concepts and provisions under the Occupational Safety & Health Act (OSHA). This course presents the responsibilities of employers and employees in implementing and complying with the safety procedures at work. This course provide an understanding of the key issues in OSH management, incident prevention, Emergency Preparedness and Response (EPR), fire safety, occupational first aid, Hazard Identification, Risk Assessment and Risk Control (HIRARC) and guide the students gradually into this multi-disciplinary science

COMMUNICATION SYSTEM FUNDAMENTALS introduces the students to the concepts of communication system. This course covers the principles of communications, analog and digital modulation techniques, multiplexing and transmission medium. It also exposes the students to the basic of data communication system.

TELECOMMUNICATION NETWORK provides students with the basic knowledge of telecommunication network of Next Generation Networks (NGN). This course focuses on NGN architectures, protocols and services, including technologies and regulation.